Door and window 1K aerosol paint
Gloss level : +/- 33% (satin)
Air dry
Ideal for refinishing exterior components of houses and commercial buildings : gutters, windows, doors, flower boxes etc… also repairs to damaged components
- Single stage paint with 33% satin gloss level (no need for clearcoat)
- Apply on aluminum, PVC, metal and wood
- Protects against corrosion and oxidation
- Very good adhesion and durability.
- Very good UV protection.
- Color matched to original manufacturers (OEM) specifications.
- We work exclusively with the highest quality products recognized in North America for door and window paint.
- 2 coats from 1 aerosol can will cover from 3 to 3.5 square feet
- 12 oz. aerosol can
Basic surface preparation
1K aerosol paint for doors and windows
A) On brand new bare PVC
- Carefully wash the part with acetone.
- Wash again with acetone just before starting to paint. Ideally, also use a tack cloth to remove any residue of dust.
You are ready to apply the paint.
B) On painted PVC:
- Carefully wash the part with acetone.
- Wash again with acetone just before starting to paint. Ideally, also use a tack cloth to remove any residue of dust.
You are ready to apply the paint.
C) On brand new bare aluminum (never painted)
- Carefully wash the part with acetone.
- Sand with 600 grit sandpaper.
- Wash again with acetone just before starting painting. Ideally, also use a tack cloth to remove any residue of dust.
- Apply Genicolor 2K Professional Series vinyl wash primer or Genicolor 1K vinyl wash primer.
You are ready to apply the paint.
IMPORTANT: For 2K products, it is mandatory to wear a carbon cartridge mask and have proper ventilation in the painting area.
D) On painted aluminum:
- Carefully wash the part with acetone.
- Sand with 600 grit sandpaper.
- Wash again with acetone just before starting to paint. Ideally, also use a tack cloth to remove any residue of dust.
You are ready to apply the paint.
2 coats are usually sufficient.
IMPORTANT: For 2K products, it is mandatory to wear a carbon cartridge mask and have proper ventilation in the painting area.
E)On brand new bare metal. (never painted)
- Carefully wash the part with acetone.
- Sand with 600 grit sandpaper.
- Wash again with acetone just before starting to paint. Ideally, also use a tack cloth to remove any residue of dust.
- Apply 1K alkyd primer or Genicolor Professional Series 2K primer filler.
- Light sand with 600 grit sandpaper.
- Wash again with acetone to remove any dust.
You are ready to apply the paint.
2 coats are usually sufficient.
IMPORTANT: For 2K products, it is mandatory to wear a carbon cartridge mask and have proper ventilation in the painting area.
F) On painted metal:
- Carefully wash the part with acetone.
- Sand with 320 or 600 grit sandpaper.
**IMPORTANT**
IF SOME METAL IS BARE, FOLLOW THESE STEPS.
- Apply 1K alkyd primer or Genicolor Professional Series 2K primer filler.
- Light sand with 600 grit sandpaper.
- Wash again with acetone to remove any dust.
You are ready to apply the paint.
2 coats are usually sufficient.
IMPORTANT: For 2K products, it is mandatory to wear a carbon cartridge mask and have proper ventilation in the painting area.
PVC / Aluminum / Metal and Wood